How do I connect the MIRACO scanner? Wifi and USB transfer, PC mode tutorial

MIRACO is a standalone scanner, so you don’t need a computer. But if you need to export your scans for further editing in Revo Scan on a PC or just want to connect it to a PC and scan there, please follow the steps below.

Let's take Mac M1 as a reference, the orders are very important.

1. File Transfer via USB cable
2. File Transfer via WiFi
3. Use MIRACO in PC Mode

1. File Transfer via USB cable

Step 1, switch on MIRACO, enter the Revo Scan PC home page, get the power cable(the one that came in the package), and be ready.

Step 2, plug in MIRACO with the cable first, and then plug in another end to the Mac.

Step 3, you will see a popup window in MIRACO, select "Data Transfer", click "OK", wait for 10s, see the popup window in Revo Scan PC, tick in the project, click "Import", wait for 15s, the transfer will start.





Step 4, wait for 1 minute and the transfer will complete.

2. File Transfer via WiFi

Step 1, make sure your MIRACO and PC connect to the same network.

Step 2, find the project you want to share in MIRACO Model Hub.

​​​​

Step 3, open Revo Scan PC, click "New Project​", click "File" at the top bar, click "Import from MIRACO", click "Wi-Fi".

​

​

​

Step 4, input 4 digits(refresh all the time) in the MIRACO popup window.

​

Step 5, check the Revo Scan PC and wait for the transfer to be completed.

3. Use MIRACO in PC Mode

Step 1, switch on MIRACO, enter the Revo Scan PC home page, get the power cable(the one that came in the package), and be ready.

Step 2, plug in MIRACO with the cable first, and then plug in another end to the Mac.

Step 3, you will see a popup window in MIRACO, select "Use MIRACO in PC Mode", click "OK", check the connection status in Revo Scan PC, wait for 15s, once the status displays Connected, click "New Project" to start.