POP 2 - How do I connect the POP 2 to my smart device?

The scanner can connect to your phone or laptop via USB or Wi-Fi (iOS devices only support Wi-Fi).

Firstly, please download the latest version of Revo Scan: https://www.revopoint3d.com/download/

• USB cable connection
• Wi-Fi connection
• Troubleshooting
• How do I get a perfect scanned model

1. USB cable connection

1) Connecting to computers(Windows and macOS)

Connect the Micro USB end of the cable to the back of your scanner, then plug the USB-C or A end into your computer.

Click VIDEO and follow the steps to connect the POP 2 scanner.

Note: Please note that POP 2 must be connected to USB 3.0 or above, as USB 2.0 will not supply sufficient operating power. There is a 2-meter-long Type C cable coming with the POP 2 scanner, it is for computers only.

2) Connecting to Android phones

Connect the 2-in-1 cable to POP's rear Micro USB port, tightening the screws. Then connect the Type-A end to a power bank or power supply, and finally, connect the Type-C to your Android device. Watch VIDEO from 1:35 and follow the steps to connect the POP 2 scanner.

2. Wi-Fi connection

1）Connecting to smartphones

Please note that if the POP 2 is connected to a computer via USB, you will not be able to connect to its Wi-Fi. 

Click VIDEO and watch it from 2:00.

2) Connecting to the computers(Windows and macOS), iPad(iOS)

Please power on the POP 2 scanner with the power socket or power bank, don't power it on with the laptop since it will read the USB connection by default.

Watch VIDEO and follow the steps to connect the POP 2 scanner.

3. Troubleshooting

POP 2 - I have a problem connecting the scanner

4. How do I get a perfect scanned model?

POP 2 - What Scan Mode do I select to get a perfect 3D model?