How do I scan with Track Scan Mode?

👉Tutorial Video: Track Scan (To Be Updated)

Content:

1. System Requirements

2. Hardware Connection and Environment Setup

3. Track Scan Steps

1. System Requirements

Minimum PC Requirements:

System Version: Windows 10/11 (64-bit)

RAM: 32 GB

CPU: Intel i7 13^th Gen or better / AMD Ryzen 7 above the 7000 series

GPU: NVIDIA GeForce RTX 3050 (8 GB)

Recommended PC Requirements:

System Version: Windows 10/11 (64-bit)

RAM: 64 GB

CPU: Intel i9 12th Gen or better

GPU: NVIDIA RTX 4060 (8 GB) or better

2. Hardware Connection and Environment Setup

Please refer to How to Connect Trackit and Tracker?

3. Track Scan Steps

Scan without markers by tracking the Scanner's position and angle in real time. The Tracker and object must stay still during the scan.

In track mode, multiple scans and model merging are required to obtain a complete 3D model.

After connecting to Trackit, click the New Project button on the Revo Track Software Home page to enter. Select “Track Scan” and start following the setting steps below:

① In Scan Settings, select Cross Lines or Single Lines mode, and the point distance as required.

② Select the Object Type according to your requirements.

③ Move the Scanner closer or further away from the object until the scanning distance indicator bar shows green.

④ Click the Auto button to automatically set the Depth Cameras’ exposure and laser brightness. Or turn off the auto exposure and adjust it by dragging the slider until the laser lines are clearly visible in the depth camera's preview window.

⑤ Adjust the distance between the Scanner and the Tracker to ensure the Scanner stays within the Tracker's FOV.

⑥ Click the button to start the scan. During the scan, aim the Scanner at the object. Refer to the distance indicator bar to ensure an excellent distance. Hold the Scanner steadily over one area for a few seconds until the model surface is entirely green. Then, move to the next area slowly and steadily. Note: Don't block the Tracker's cameras during scanning,

⑦ Click the button to pause and check your model anytime during the scan. If the model is incomplete, click the button to continue your scan. Click the Complete button to finish the scan when the model is complete.

⑧ Click the One-click Edit to process the model automatically, or manually edit the model using the Fusion and Mesh settings, and other tools if you need a more detailed model.

⑨ After post-processing, export the model in formats such as PLY, OBJ, or STL.